Blue ECO Titanium 900

Hover over image to zoom
Click Image to enlarge
Brand: Blue ECO
Product Code: eco900
Reward Points: 0
Availability: In Stock
Price: £1,399.00
   - OR -   

The BLUE ECO pump was designed for fresh-, brackish- or salt water, or other low viscosity liquids which are neither explosive nor aggressive or oily. The pump may be used for clean water and in a limited way also for contaminated water.

Other benefits:

Noise free

Totally different bearing system with a hollow axle

Automatic internal rinse system

Reinforced outer bearing attachment

Mechanically stronger power supply cable

Comes with noise suppressing rubber feet

O-ring seal between impeller and pump head (provides more flow & higher lift!) Controller:

Totally new controller cabinet that is more waterproof than the old one.

Strongly improved cooling system

Enlarged LCD display with indication of: RPM, hour counter, used amps and used wattage

Remotely controllable and viewable.

 

The pump is not intended for water with coarse debris. Particles should not be larger than 0.8 mm. Basically the pump is intended for use with "clean water” without solid particles which may damage the bearings, like, for example sand and pyrolusite after the treatment of ponds with potassium permanganate.

Warranty does not apply for damages resulting from above described particles. The bearings of the pump are milled spirally to evacuate particles larger than 0.8 mm. The bearing plate contains enough space for a filter. The filter must be cleaned regularly regardless the degree of soiling. A special amount of water is flushing the pump housing to ensure long term operation of the pump. To decrease the flow rate in the housing, perfectly close the plate and adjust to the smallest dot on the plate. Now the bearing lubrication by water is very low.

The BLUE ECO Pump is generally used for filter systems of ponds or pools and /or for brooks and cascades. The pump is not self-priming, so for use above the water surface a check valve must be installed to the pump’s inlet. In this case the pump must be water filled before operation.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



payment
311,133
creativeidesignsPowered By Signwizard
Discount Koi Supplies © 2012